Topo Universal Pattern Rear Window Decal 2nd and 3rd Gen Tacoma (Center Window or No Center Window)
We finally introduced to you, the all-new Topo pattern window decals for the 2nd generation and 3rd generation Toyota Tacoma. We have had many requests for the topographic decals to be applied in many places on the Tacoma, but specifically the rear windows. This Topo decal pictured here will work and is applicable for the rear windows on a 2nd gen and 3rd gen Tacoma both with the center window and without. You can use this Universal decal on either the outside windows, 1 outside window, or the center window only. You do not have to apply the entire decal over all three windows, however, you can if you want. If you are looking for a universal topographic pattern decal, this will likely work for you as well given the specs or correct for your application. The color of the decal is a light grey, similar to a Nardo Grey for the hex code; #f7f7f7. The lines in this Topo pattern were specifically designed for the rear window on the Tacoma. We wanted the lines to match up exactly from the center window to the outside window to give the appearance from the back that this is one complete topographic map.
Below you will find the complete step-by-step installation guide for what it takes to apply a rear window decal on a 2nd generation Tacoma. The same concept applies for the 3rd gen Tacoma.
Step 1. Mark Centerline on Decal and Cab Light
Step 2. Remove Transfer Tape
Step 3. Pull Transfer Tape and Decal Over
Step 4. Press Transfer Tape From Center Towards the Top & Bottom
Step 5. Press Transfer Tape From Center Towards Outside Corners
Step 6. Hand Applicator Squeegee & Utility Knife
Step 7. Hand Applicator Squeegee & Utility Knife on Corners
Step 8. Mark All Cuts with Utility Knife
Step 9. Press Transfer Tape and Mark All Final Cuts
Step 10. Remove Transfer Tape Once Cuts are Made
See Through The Back